Custom made kydex sheath for the Benchmade Nimravus Tanto
This sheath features a strong hold on the blade,and the non-reflective kydex material will not dull blade edge. Sheaths are fitted with a reversible belt clip, allowing the user to choose between left or right handed carry upward and downward draw. The clip screws play a double role in the sheath;they hold the clip to the sheath, and they can also be used to adjust the tension on the blade's draw. (We recommend that you set these screws with locktight once the tension is adjusted to ensure they stay where you want them.)
Our sheaths are made here in the U.S.A. from all U.S. made materials. Each sheath is custom made for each customer. Nothing at Extreme Edge Is mass produced.
Extreme Edge Custom Kydex offers a 100% lifetime warranty. We Will Repair or replace your sheath excludes fire damage we do not warranty fire damaged items.)
Note: Because our sheaths are not pre fab, there may be slight cosmetic differences in each sheath.
Thank you for viewing our product. Feel free to message us about color choices and custom jobs. Check out our other sheaths we make and have up for sale.
Below are base prices for our custom sheaths. Note, Prices cover standard colors and our custom clip. Additional charge for brands such as Molle-lok systems , belt loops, tac-loks, and other brand name attachments are an
1 – 3" $30.00 shipped
3 – 5" $45.00 shipped
5 -7" $55.00 shipped
7 -9" $65.00 shipped
9 -11" 75.00 shipped
11+ email for quote firstname.lastname@example.org
Custom Kydex J-Hook clip – free of charge
Molle lok 3rd gen clip(small) -$15.00 extra
Molle lok 3rd gen clip (large)-$18.00 extra
Tak-lok clip (small)- $15.00 extra
Tac-lok clip (large)-$16.00 extra
No extra charge for the following ciolors:
Special colors available for an additional $6.00
Hot Pink Camo
Gun Metal Grey
EYELET SIZE This refers to the 2 different size eyelets we use on our sheaths.
It is your choice to MIX the 2 sizes or get all the eyelets in the larger size
HANDED This is simply the choice of left or right handed
CLIPS This is the choice of the primary clip for the sheath
SECONDARY CLIP This option lets you choose a second clip option if so desired ie you picked a tek-lok for the primary and want a j-hook as well
COLOR This option is for the color you want the sheath NOTE this link will take you to a album with as many photos of colors we have some colors are available but have never been ordered to be photographed and posted https://www.facebook.com/pg/extremeedgecustomkyde...
FACTORY STEEL LOOP This option is for knives that come with a fire steel this option will be a holder for the factory steel provided to you with the knife
FIRE STEEL HOLDER This oprion is for you to add a holder for a steel you own we have a few popular models here for molding purposes NOTE the diameter and any info on your steel should be provided to us in the NOTES section of your order
CUSTOM FIRE STEEL & HOLDER This option is for a 5/16 x 4 steel fitted with a matching kydex handle and holder
DRAINAGE HOLES This option is fot 3 holes to be drilled in the sheath at the tip to allow water to escape if necessary
ROPE CUTTER SLOT This option is for a milled slot that exposes the cutting edge of the blade just enough to cut rope or 550 cord fishing line exc without drawing the knife
SLIDE LOCK This option is for a milled slot with lock hardware that makes it nearly impossible to remove the knife from the sheath when in locked position
CLIP ATTACHMENT EYELET COLOR This option is for the larger eyelets color
PIGGYBACK KNIVES This option is to add a second sheath onto the original using our ADJUSTABLE PIGGYBACK SYSTEM this allows the secondary sheath to swing out of the way and inline with the first one also the second sheath can be a separate stand alone sheath by itself
SCALES This option is for knives that have removable scales letting us know if there on or off the knife so its molded correctly
VERSION This option is for knives that come in different models like a SRK all 3 versions are different from one another by blade specs this lets us identify what version we need to mold off of if we have more than model
Production and payment process:
Step 1. Place an order with us. your sheath will be put into production in the order they are received.
Step 2. 3 separate tests will run on each sheath to ensure quality.
Step 3. Your sheath will be shipped and tracking information will be updated